1.4501 / S32760 / F55 / X2CrNiMoCuWN25-7-4

Stainless steel                                              1.4501 / S32760 / F55                                          

1.4501 - Round bar            ASTM A182 F55 - Round bar                 UNS S32760 - Round bar
1.4501 - Sheet / Sheets     ASTM A240 F55 - Plate / Plates             UNS S32760 - Sheet / Sheets
1.4501 - cut from sheet     ASTM A240 F55 - cut from plate           UNS S32760 - cut froms heet
1.4501 - Seamless tube    ASTM A790, EN 10216-5                        UNS S32760 - Seamless tube
1.4501 - Welded tube        ASTM A790, EN 10217-7, ASTM A928  UNS S32760 - Welded tube
1.4501 - Flanges               EN 1092-1, ASTM                                    UNS S32760 - Flanges
1.4501 - Fittings, Butt-weld                                                              UNS S32760 - Fittings, Butt-weld
1.4501 - NPT, BSP, Socket Weld Fittings                                        UNS S32760 - NPT, BSP, Socket Weld Fittings                                    

C max 0,03     Cr 24,0 - 26,0     Mo 3,0 - 4,0    Ni 6,0 - 8,0     N 0,20 - 0,30 

SuperDuplex 1.4501 - UNS S32760 - F51 is a corrosion resistant austenitic-ferritic SuperDuplex steel for applications where conventional Duplex grades do not meet the corrosion requirements. 1.4501 - UNS S32760 - F51 is characterised by very good resistance in chloride containing media. As a result of its higher Chromium and Molybdenum content, 1.4501 - UNS S32760 - F51 reached Pren contents between 38-46. In comparison with austenitic materials 1.4501 - UNS S32760 - F51 shows a nearly doubling the 0.2% yield strength. In addition, this material with appropriate heat treatment in the temperature range to 40deg C characterized by a moderate impact energy.

Stock range

SuperDuplex 1.4501 - UNS S32760 - F55 round bar brightdrawn/ground tol. h9 acc. to DIN EN 10278 in lengths of 6 mtr
Sizes:

SuperDuplex 1.4501 - UNS S32760 - F55-  Forgings
Forgings acc. to drawings, bars, discs and rings on request.

Free-form forged parts acc. to drawing, forged bars, discs and rings on request

SuperDuplex 1.4501 - UNS S32760 - F55 - Hollow bars
From round bars turned and drilled on request.

SuperDuplex 1.4501 - UNS S32760 - F55 - hexagon bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 176 ) long 3 mtr
Sizes: hex 17 mm - hex 50 mm

SuperDuplex 1.4501 - UNS S32760 - F55 - Sheets/Plates hotrolled Finish 1
Sizes:
Thickness   4 mm - 50 mm
Width         1000 / 1250 / 1500 / 2000 / 2500 mm
Length        2000 / 2500 / 3000 / 6000 / 6000 tot max. 15000 mm

SuperDuplex 1.4501 - UNS S32760 - F55 - sheets / plates plasma cutting / water-jet cutting / laser-cutting / sawn cuttings
 

1.4501 - UNS S32760 - F55 - ASTM A790, EN 10216-5, Seamless tubes
1/2"-8"    Sch10S / Sch40S / Sch80S / Sch160

1.4501 - UNS S32760 - F55 - ASTM A790, EN 10217-7, ASTM A928, welded tubes
2" >                   wallthickness >3mm         from production

1.4501 - UNS S32760 - F55 - EN 1092-1, Flanges
Type 01 - Flat flanges
Type 02 - Lapped flanges
Type 05 - Blind Flanges
Type 11 - Welding neck flanges
Type 12 - Threaded flanges
Type 32 / 35 / 36 / 37 - Collars

1.4501 - UNS S32760 - F55 - ASTM, Flanges
Slip-on flanges
Blind flanges
Welding neck flanges
Lap-Joint flanges
Threaded flanges
Socket weld flanges
Stub ends

1.4501  - UNS S32760 - F55 - Fittings, butt-weld
Elbows
T-pieces / Tees
Concentric reducers
Excentric reducers
Caps

1.4501 - UNS S32760 - F55 - NPT, BSP, Socket Weld fittings
Several possibilities, at request

Certificates:     EN 10204 / 3.1