1.4878 / AISI 321 H

Stainless steel                                             1.4878 / AISI 321 H / X8CrNiTi18-10                                    Acier Inoxydable

Rustfrit stål                                                                                                                                                     Acciai Inossidabli

Rostfrit stål                                                                                                                                                     Acero Inoxidable

1.4878 - Round bar              DIN EN 10278 - Round bar                  X8CrNiTi 18-10 - Round bar  
1.4878 - Sheet / Sheets       DIN ENASTM A240  - Plate / Plates    X8CrNiTi 18-10 - Sheet / Sheets
1.4878 - cut from sheet        cut from plate                                     X8CrNiTi 18-10 - Cut from Sheet
1.4878 - Seamless Tube     ASTM A790, EN 10216-5                        X8CrNiTi 18-10 - Seamless Tube
1.4878 - Welded tube        ASTM A790, EN 10217-7, ASTM A928  X8CrNiTi 18-10 - Welded Tube
1.4878 - Flanges                EN 1092-1, ASTM                                   X8CrNiTi 18-10 - Flanges
1.4878 - Fittings, Butt-weld                                                             X8CrNiTi 18-10 - Fitting, Butt-weld       
1.4878 - NPT, BSP, Socket Weld Fittings                                       X8CrNiTi 18-10 - NPT, BSP, Socket Weld Fittings   

High temperature steel 1.4878 will be deliver in rounds - forgings - hexagon - square - flat - angle and sheets.

W.Nr. 1.4841 / 321H is heat resistant up to 850° C. 
        

Stock range

1.4878 - AISI 321H SS round bar brightdrawn/ground tol. h9 acc. to DIN EN 10278 in lengths of 3 mtr.
Sizes: Ø 3,00 mm - Ø 100,00 mm

1.4878 - AISI 321H SS round bar hotrolled / forged, peeled / turned acc. DIN EN 10060 ( formerly DIN 1013 ), long 4-6 mtr.
Sizes: Ø 20,00 mm - Ø 525,00 mm

Forgings

1.4879 - AISI 321H SS hexagon bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 176 ) long 3 mtr. 
Sizes: 10,00 mm - 65,00 mm

1.4878 - AISI 321H SS square bars hotrolled and pickled tolerance DIN EN 10059 ( formerly DIN 1014 ) long 4-6 mtr. 
Sizes: 25,00 mm - 150,00 mm

1.4878 - AISI 321H SS flat bars hotrolled and pickled tolerance DIN EN 10058 ( formerly DIN 1017 ) long 4-6 mtr. 
Sizes: 20 x 5 mm - 150 x 13 mm

1.4878 - AISI 321H SS flat bars cut /slitted from sheets tolerance DIN EN 10058 ( formerly DIN 1017 ) long 4-6 mtr. 
Sizes: 15 x 5 mm - 100 x 12 mm

1.4878 - AISI 321H SS Angle bars equal hotrolled and pickled tolerance DIN 1028 long 6 mtr.
Sizes: 20 x 20 x 3 mm - 100 x 100 x 10 mm

1.4878 - AISI 321H SS Sheets/Plates hotrolled Finish 1. 
Sizes:
Thickness  3 mm - 150 mm
Width         1000 / 1250 / 1500 / 2000 mm
Length        2000 / 2500 / 3000 mm

1.4878 - AISI 321H SS sheets / plates cut to size. 
Plasma cutting
Waterjet cutting
Laser cutting
Sawn cutting
 

1.4878 - AISI 321H - ASTM A790, EN 10216-5, Seamless tubes
1/2"-8"    Sch10S / Sch40S / Sch80S / Sch160

1.4878 - AISI 321H - ASTM A790, EN 10217-7, ASTM A928, welded tubes
ø6 - ø63,5mm   wallthickness 0,4 - 3mm   from production
2" >                   wallthickness >3mm         from production

1.4878 - AISI 321H - EN 1092-1, Flanges
Type 01 - Flat flanges
Type 02 - Lapped flanges
Type 05 - Blind Flanges
Type 11 - Welding neck flanges
Type 12 - Threaded flanges
Type 32 / 35 / 36 / 37 - Collars

1.4878 - AISI 321H - ASTM, Flanges
Slip-on flanges
Blind flanges
Welding neck flanges
Lap-Joint flanges
Threaded flanges
Socket weld flanges
Stub ends

1.4878 - AISI 321H - Fittings, butt-weld
Elbows
T-pieces / Tees
Concentric reducers
Excentric reducers
Caps

1.4878 - AISI 321H - NPT, BSP, Socket Weld fittings
Several possibilities, at request

Certificates:     EN 10204 / 3.1