Stainless steel                                                    1.4034 / AISI 420                                           

Rustfrit steel                                                                                                              

Rostfrit steel                                                                                                        

 

W.Nr. 1.4034BS 420S45SIS
AISI 420AFNOR Z44C14/Z38C13JIS
X46Cr13DIN 17740  1.4034

                               

C 0,43 - 0,50     Cr 12,50 - 14,50     S < 0,030        

 

1.4034 is characterised by its high hardenability in conjunction with good corrosion resistance in moderately corrosive environments. Due to its higher carbon content, it is more hardenable than 1.4031. It is used in the quenched and tempered condition and due to its high hardness, is ideally suited for the production of cutting tools and the production of roller bearings.  
       

Stock range 

 


1.4034 - AISI 420 round bar brightdrawn/ground tol. h9 acc. to DIN EN 10278 in lengths of 3 mtr
Sizes:

Ø 5,00 mmØ 10,00 mmØ 15,00 mmØ 22,00 mmØ 30,00 mmØ 42,00 mmØ 65,00 mm
Ø 6,00 mmØ 11,00 mmØ 16,00 mmØ 24,00 mmØ 32,00 mmØ 45,00 mm
Ø 7,00 mmØ 12,00 mmØ 18,00 mmØ 25,00 mmØ 35,00 mmØ 50,00 mm

Ø 8,00 mm

Ø 13,00 mmØ 20,00 mmØ 26,00 mmØ 36,00 mmØ 55,00 mm
Ø 9,00 mmØ 14,00 mmØ 21,00 mmØ 28,00 mmØ 40,00 mmØ 60,00 mm

 

1.4034 - AISI 420 round bar hotrolled / forged, peeled / turned acc. DIN EN 10060 ( formerly DIN 1013 ), long 4-6 mtr
Sizes:

Ø 30,00 mmØ 60,00 mmØ 90,00 mmØ 140,00 mmØ 190,00 mmØ 280,00 mm
Ø 35,00 mmØ 65,00 mmØ 95,00 mmØ 150,00 mmØ 200,00 mmØ 290,00 mm
Ø 40,00 mmØ 70,00 mmØ 100,00 mmØ 160,00 mmØ 220,00 mmØ 300,00 mm

Ø 45,00 mm

Ø 75,00 mmØ 110,00 mmØ 165,00 mmØ 240,00 mmØ 325,00 mm
Ø 50,00 mmØ 80,00 mmØ 120,00 mmØ 170,00 mmØ 250,00 mmØ 330,00 mm

Ø 55,00 mm

Ø 85,00 mmØ 130,00 mmØ 180,00 mmØ 275,00 mmØ 350,00 mm

Brightbars only in full lengths, not cutted.
Peeled material also possible to in fixlengths.

1.4034 - AISI 420 Forgings
Forgings acc. to drawings, bars, discs and rings on request.

1.4034 - AISI 420 Blocks / flat, sawn from forged primematerial
Sizes on request.

1.4034 - AISI 420 Sheets/Plates hotrolled finish 1
Sizes: 1000 x 2000 mm / 1250 x 2000 mm / 1250 x 2500 mm

Thickness:

3,00 mm5,50 mm10,00 mm
3,30 mm6,00 mm
3,50 mm6,50 mm
4,00 mm7,00 mm
4,50 mm7,50 mm
5,00 mm8,00 mm

 

Certificates: EN 10204 / 3.1

I want to request an online offer

Go to the form

Request Offer

Leave your telephone number here, we will call you back as soon as possible.

You can call us at +31 (0) 186 651004 or send an email to info@steelinox.nl