Stainless steel                                                    1.4104 / AISI 430F                                       

Rustfrit steel                                                                                                                  

Rostfrit steel                                                                                                                           

 

W.Nr. 1.4104BSSIS 2383
AISI 430FAFNOR Z13CF17JIS 430F
X14CrMoS17DIN 17740  1.4104

                               

C 0,10 - 0,17     Cr 15,50 - 17,50     Mo 0,20 - 0,60     S 0,15 - 0,35   

 

The machinability of 1.4104 is far superior to that of the ferritic 17% chromium steel, 1.4016 as a result of the controlled sulphur addition to this grade of steel. The addition of sulphur however reduces the resistance to corrosion, and as such 1.4016 is significantly more resistant to corrosion than 1.4104, despite their similar chromium contents. It should ben noted that as a result of the sulphur addition, neither minimum impact properties, nor elevated temperature properties are specified.
               

Stock range

 


1.4104 - AISI 430F round bar brightdrawn/ground tol. h9 acc. to DIN EN 10278 in lengths of 3 mtr
Sizes:

Ø 2,00 mmØ 6,50 mmØ 10,50 mmØ 16,00 mmØ 24,00 mmØ 36,00 mmØ 62,00 mm
Ø 2,50 mmØ 7,00 mmØ 10,75 mmØ 16,27 mmØ 25,00 mmØ 38,00 mmØ 65,00 mm
Ø 3,00 mmØ 7,10 mmØ 10,76 mmØ 17,00 mmØ 26,00 mmØ 40,00 mmØ 70,00 mm

Ø 3,50 mm

Ø 7,12 mmØ 11,00 mmØ 18,00 mmØ 27,00 mmØ 42,00 mmØ 75,00 mm
Ø 4,00 mmØ 7,50 mmØ 11,50 mmØ 18,27 mmØ 28,00 mmØ 45,00 mmØ 80,00 mm
Ø 4,50 mmØ 8,00 mmØ 12,00 mmØ 19,00 mmØ 29,00 mmØ 46,00 mmØ 85,00 mm
Ø 5,00 mmØ 8,50 mmØ 13,00 mmØ 20,00 mmØ 30,00 mmØ 48,00 mmØ 90,00 mm
Ø 5,25 mmØ 8,95 mmØ 14,00 mmØ 21,00 mmØ 32,00 mmØ 50,00 mm

Ø 95,00 mm

Ø 5,28 mmØ 9,00 mmØ 14,63 mmØ 21,90 mmØ 33,00 mmØ 52,00 mmØ 100,00 mm
Ø 5,50 mmØ 9,50 mmØ 14,65 mmØ 22,00 mmØ 34,00 mmØ 55,00 mm 
Ø 6,00 mmØ 10,00 mmØ 15,00 mmØ 23,00 mmØ 35,00 mmØ 60,00 mm 

1.4104 - AISI 430F round bar ground tol. h8 acc. to DIN EN 10278 in lengths of 3 mtr
Sizes:

Ø 5,00 mmØ 12,00 mmØ 15,00 mmØ 20,00 mmØ 36,00 mmØ 48,00 mm
Ø 6,00 mmØ 13,00 mmØ 16,00 mmØ 25,00 mmØ 40,00 mmØ 50,00 mm
Ø 10,00 mmØ 14,00 mmØ 18,00 mmØ 28,00 mmØ 45,00 mmØ 60,00 mm

1.4104 - AISI 430F round bar hotrolled / forged, peeled / turned acc. DIN EN 10060 ( formerly DIN 1013 ), long 4-6 mtr
Sizes:

Ø 35,00 mmØ 70,00 mmØ 105,00 mmØ 140,00 mmØ 210,00 mmØ 280,00 mm
Ø 40,00 mmØ 75,00 mmØ 110,00 mmØ 150,00 mmØ 220,00 mmØ 300,00 mm
Ø 45,00 mmØ 80,00 mmØ 115,00 mmØ 160,00 mmØ 230,00 mmØ 320,00 mm

Ø 50,00 mm

Ø 85,00 mmØ 120,00 mmØ 170,00 mmØ 240,00 mmØ 325,00 mm
Ø 55,00 mmØ 90,00 mmØ 125,00 mmØ 180,00 mmØ 250,00 mmØ 350,00 mm

Ø 60,00 mm

Ø 95,00 mmØ 130,00 mmØ 190,00 mmØ 260,00 mmØ 400,00 mm
Ø 65,00 mmØ 100,00 mmØ 135,00 mmØ 200,00 mmØ 270,00 mm

Above Ø 400,00 mm up to Ø 550,00 mm sizes from stock available.

1.4104 - AISI 430F Forgings
Forgings acc. to drawings, bars, discs and rings on request

1.4104 - AISI 430F Blocks / flat, sawn from forged primematerial
Sizes on request.

1.4104 - AISI 430F square bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 176 ) long 3 mtr
Sizes:

5,00 mm9,00 mm15,00 mm22,00 mm35,00 mm60,00 mm
6,00 mm10,00 mm16,00 mm24,00 mm40,00 mm
7,00 mm12,00 mm18,00 mm25,00 mm45,00 mm
8,00 mm14,00 mm20,00 mm30,00 mm50,00 mm

1.4104 - AISI 430F square bars hotrolled and pickled tolerance DIN EN 10059 ( formerly DIN 1014 ) long 4-6 mtr
Sizes: 80,00 mm

1.4104 - AISI 430F hexagon bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 176 ) long 3 mtr
Sizes:

sw 5 mmsw 10 mmsw 15 mmsw 22 mmsw 36 mmsw 60 mm
sw 6 mmsw 11 mmsw 16 mmsw 24 mmsw 41 mm
sw 7 mmsw 12 mmsw 17 mmsw 27 mmsw 46 mm
sw 8 mmsw 13 mmsw 18 mmsw 30 mmsw 50 mm
sw 9 mmsw 14 mmsw 19 mmsw 32 mmsw 55 mm

 

Certificates:     EN 10204 / 3.1

  

I want to request an online offer

Go to the form

Request Offer

Leave your telephone number here, we will call you back as soon as possible.

You can call us at +31 (0) 186 651004 or send an email to info@steelinox.nl